Regina Utility Accessibility Rules - City Bylaws

Utilities and Infrastructure Saskatchewan 3 Minutes Read · published May 24, 2026 Flag of Saskatchewan

Regina, Saskatchewan requires that utility and infrastructure projects within the public right-of-way and on municipal lands meet accessibility standards to protect pedestrians, persons with disabilities and road users. This guide summarizes the applicable city instruments, who enforces accessibility requirements, how permits and approvals typically work, and practical compliance steps project teams and contractors should follow before, during and after construction.

Legal scope and applicable instruments

Municipal requirements for accessibility on utility projects are set by City of Regina bylaws, permit conditions administered by Public Works and Development Services, and design/construction standards adopted by the city for streets, sidewalks and crossings. Where provincial or federal accessibility legislation applies, the city’s requirements can reference or align with those standards for municipal infrastructure.

Penalties & Enforcement

The City of Regina enforces accessibility and right-of-way rules through By-law Enforcement, Public Works and Development Services. Specific monetary fines and fee schedules for accessibility breaches on utility projects are not specified on the cited municipal pages referenced in the resources below; see the Help and Support / Resources links for official contacts and bylaw texts.

  • Enforcer: Bylaw Enforcement and Public Works, with project oversight by Development Services.
  • Inspection and complaints: report accessibility hazards to the city contact or online reporting portal listed in Resources.
  • Fines: not specified on the cited page.
  • Escalation: first or continuing offences, and whether daily fines apply, are not specified on the cited page.
  • Non-monetary actions: orders to stop work, mandatory remediation, remediation timelines and court prosecutions are used by the city.
  • Appeals and reviews: appeals typically follow the city’s administrative review or court processes; specific time limits for appeals are not specified on the cited page.
Failure to provide accessible temporary routes can result in orders to remedy the condition.

Applications & Forms

Most utility works in the right-of-way require a permit from the city and may require traffic control plans and accessibility mitigation measures. The precise application names, form numbers, fees and submission methods vary by project type and are listed on the city permit pages in Resources; if a specific form or fee is required for a work type, that is published on the city permit page.

  • Common permits: right-of-way/road-occupation permits and excavation permits (see city permit pages in Resources).
  • Deadlines: submit permit applications well before planned start dates; exact lead times are on the permit pages.
  • Fees: project-specific; consult the city permit fee schedules.
Contact the city permit office early to confirm required forms and timelines.

Design, construction and accessibility controls

Accessible design controls for temporary and permanent works include maintaining continuous accessible pedestrian routes, providing curb ramps and tactile warnings where required, and ensuring temporary crossings meet slope and surface requirements. Contractors must include accessible detour routing and clear signage in traffic management plans submitted with permits.

  • Construction must preserve or restore accessible paths of travel during works.
  • Traffic control and detour plans must include accessible routing details.
  • Documentation: retain plans, as-built drawings and inspection records to demonstrate compliance.
Keep accessible paths open or provide clearly signed, safe alternatives during construction.

FAQ

Do I need a permit for utility work in a Regina street or sidewalk?
Yes. Most work in the public right-of-way requires a city permit such as a right-of-way or excavation permit; check the city permit pages for your project type.
What happens if temporary access for people with disabilities is blocked?
The city can issue orders to remedy accessibility hazards and enforce corrective action; specific fines and timelines are set out in the city’s enforcement materials and permit conditions.

How-To

  1. Identify project scope and whether it affects sidewalks, curb ramps or crossings.
  2. Contact City of Regina Permits and Public Works to confirm permit types and submission requirements.
  3. Prepare traffic control and accessibility plans showing continuous accessible routes and tactile markers where needed.
  4. Submit permits, pay fees and obtain approvals before starting construction.
  5. During work, maintain records, respond promptly to inspections and remediate any accessibility orders.

Key Takeaways

  • Plan for accessibility from design through to restoration of the site.
  • Obtain required right-of-way and excavation permits and include accessibility in traffic control plans.
  • Contact Bylaw Enforcement or Public Works for guidance and to report hazards.

Help and Support / Resources

Categories

General Governance and Administration Public Safety Public Health and Welfare Land Use and Zoning Housing and Building Standards Transportation Environmental Protection Parks and Public Spaces Business and Consumer Protection Taxation and Finance Labor and Employment Education Civil Rights and Equity Elections and Campaign Finance Events and Special Uses Signs and Advertising Utilities and Infrastructure Technology and Data