Regina Sign Permit - How to Apply (Bylaw Guide)

Signs and Advertising Saskatchewan 3 Minutes Read · published May 24, 2026 Flag of Saskatchewan

In Regina, Saskatchewan, most commercial and many temporary signs require a municipal sign permit before installation. This guide explains who needs a permit, which municipal rules apply, how to apply, enforcement and appeal routes so businesses and property owners can comply with City of Regina bylaws and avoid orders or removal.

Overview

The City regulates signs through planning and zoning rules and specific sign permit processes. To start an application or to confirm whether your sign is exempt, consult the City of Regina sign permit information page[1] and the applicable zoning or sign bylaw provisions (zoning/bylaw)[2].

Who needs a sign permit

  • Permanent business signs attached to buildings.
  • Freestanding signs, pylon signs and billboards.
  • Temporary signs in many commercial and public-right-of-way locations unless specifically exempted.

Applications & Forms

The City publishes a Sign Permit Application and guidance on the permits page; the application identifies required drawings, site plans and any engineering for large or illuminated signs. Fees and submission instructions are listed on the City permit page but specific fee tables are not provided in a single consolidated schedule on that page (see application)[1].

Collect site plans and elevation drawings before you start the application to speed review.

Penalties & Enforcement

Enforcement is carried out by the City of Regina’s Bylaw Enforcement and Planning/Development departments; common remedies include orders to remove or alter signs and prosecution for bylaw offences. Where the municipal bylaw or enforcement page does not list specific monetary penalties or escalation by offence, that information is not specified on the cited page and you should consult the enforcement contact for details (Bylaw Enforcement)[3].

  • Fine amounts: not specified on the cited page; consult Bylaw Enforcement for current fines and ticket schedules.[3]
  • Escalation: first, repeat and continuing offences and any daily penalties are not specified on the cited page; see enforcement contact for ranges.[3]
  • Non-monetary sanctions: removal orders, compliance orders, and possible seizure or court action are used to secure compliance under City bylaws.
  • Enforcer and complaints: Bylaw Enforcement and Planning/Development receive complaints and inspect signs; contact details are on the City site.[3]
  • Appeal and review routes: specific appeal timelines or the body to hear appeals are not clearly listed on the cited pages; applicants should request appeals information from the department named on any order or ticket.[3]
If you receive an order, act quickly and seek the contact shown on the notice to learn appeal deadlines.

Common violations

  • Installing a sign without a permit.
  • Placing a sign in a prohibited zone or public right-of-way.
  • Using a sign size or illumination exceeding bylaw limits.

FAQ

Do I need a permit for a temporary banner?
Often yes; temporary sign rules depend on location, duration and whether the sign is on private property or within the public right-of-way. Check the City sign permit page for exemptions and rules.[1]
How long does approval take?
Review times vary by application complexity and completeness; there is no single review-time guarantee on the City page, so apply well before your planned install date.[1]
Can I appeal a removal order?
Appeal routes and time limits are not specified on the cited pages; follow the order’s instructions and contact Bylaw Enforcement or Planning for appeal details.[3]

How-To

  1. Confirm whether your sign requires a permit by reviewing the City sign permit guidance and local zoning rules.[1]
  2. Prepare required materials: site plan, elevation drawings, dimensions, and structural details if applicable.
  3. Complete the Sign Permit Application available from the City and pay any applicable fee as instructed on the application page.[1]
  4. Submit the application to Planning/Development as directed; track review status and respond to requests for more information.
  5. If ordered to alter or remove a sign, follow the order and use the contact on the notice to learn about appeals and timelines.[3]
Keep a copy of the stamped permit and plans on site while the sign is installed.

Key Takeaways

  • Most permanent and many temporary signs require a City permit.
  • Submit complete drawings and site plans to avoid delays.
  • Contact Bylaw Enforcement or Planning for enforcement, fines and appeal procedures.

Help and Support / Resources

  1. [1] City of Regina - Signs & Advertising
  2. [2] Regina Zoning Bylaw
  3. [3] City of Regina - Bylaw Enforcement

Categories

General Governance and Administration Public Safety Public Health and Welfare Land Use and Zoning Housing and Building Standards Transportation Environmental Protection Parks and Public Spaces Business and Consumer Protection Taxation and Finance Labor and Employment Education Civil Rights and Equity Elections and Campaign Finance Events and Special Uses Signs and Advertising Utilities and Infrastructure Technology and Data