Regina Sign Bylaw: Size, Height & Materials

Signs and Advertising Saskatchewan 4 Minutes Read · published May 24, 2026 Flag of Saskatchewan

Regina, Saskatchewan regulates signs through its municipal planning and bylaw framework. This guide explains how size, height and material requirements are handled in Regina, who enforces the rules, and how to apply for sign permits or request a variance. It summarizes typical standards you will need to check before designing or installing a new sign, outlines the permit application steps, and shows how to report non-compliant signage. For exact numeric limits, permitted materials, illumination rules and any site-specific exceptions refer to the city’s sign and zoning rules and contact the planning or bylaw office listed in the Help and Support / Resources section below.

Always confirm numeric limits with the city before ordering fabrication.

Standards overview

Regina integrates sign controls in its planning and permitting system to manage safety, visibility and compatibility with land use. Common elements regulated include maximum sign area, maximum height for freestanding and roof-mounted signs, permitted materials and finish, structural requirements, illumination and clearance from roads and sidewalks. Variances may be available through the development review or approval process for site-specific needs.

  • Permit required: most permanent and some temporary signs require a sign permit or development permit.
  • Size and height: numeric limits vary by zoning district and sign type and must be confirmed with zoning regulations.
  • Materials and structure: materials must meet structural, fire and wind-resistance standards and may require engineering certification for large signs.
  • Illumination and electrical: illuminated signs require compliance with electrical codes and may need separate electrical permits.

Penalties & Enforcement

Enforcement is handled by the City of Regina bylaw and planning departments. Where the municipal code or zoning regulations set fines or penalties, they are applied through the city’s enforcement process; if specific monetary penalties or escalation tiers are not published on the city’s public sign pages, they are noted below as not specified on the cited page.

  • Fine amounts: not specified on the cited page.
  • Escalation: information on first, repeat or continuing offence schedules is not specified on the cited page.
  • Non-monetary sanctions: common remedies include orders to remove or modify the sign, stop-work orders, seizure of unlawful signage and court actions to enforce compliance.
  • Enforcer and complaints: By-law Enforcement and Planning/Development staff administer sign rules and respond to complaints; contact details appear in Help and Support / Resources.
  • Appeal and review: appeal routes for permit refusals or enforcement orders are handled via the city’s administrative review or provincial appeal channels; specific time limits for appeals are not specified on the cited page.
  • Defences and discretion: compliance may depend on existing permits, approved variances, or demonstrable safety reasons; discretionary approvals can be sought through the development review process.
If you receive an order, act promptly to avoid escalation of enforcement actions.

Applications & Forms

The city publishes permit and application guidance for signs and development. Typical documents include a sign permit application or development permit form, site plans, drawings, elevation views, and electrical permit applications for illuminated signs. Fee schedules and form numbers may be set in the city’s permit fee schedules; if a specific form number or fee is not published on the city sign information pages, it is not specified on the cited page.

  • Common submission items: application form, scaled drawings, dimensions, materials list, mounting details and structural/engineering certificates when required.
  • Fees: see city fee schedule; specific amounts are not specified on the cited page.
  • Submission: typically by online portal or in person at the planning counter; see Help and Support / Resources for contact info and links.

Common violations

  • Installed without a permit.
  • Exceeding maximum allowed area or height for the zoning district.
  • Obstructing sidewalks or sightlines at intersections.
  • Unsafe materials or poor installation creating a hazard.
Early permit checks reduce redesign and remediation costs.

How to report a non-compliant sign

  • Contact By-law Enforcement using the official complaint form or phone number in the Resources section.
  • Provide location, photos, and any permit information you can find.
  • Keep records of communications and any city response for follow-up.

FAQ

Do I need a permit to install a new sign?
Most permanent and many temporary signs require a sign permit or development permit; check the city’s sign and zoning rules before installation.
Where can I find maximum size and height limits?
Size and height limits are set by sign type and zoning district; consult the city’s sign regulations or planning staff to confirm numeric limits for your site.
What if my sign is illuminated?
Illuminated signs often require electrical permits and must meet electrical and illumination standards; consult both planning and building/electrical permit offices.
Who enforces sign rules and how are complaints handled?
By-law Enforcement and Planning/Development staff enforce sign rules; complaints can be submitted through the city complaint channels listed under Resources.

How-To

  1. Check zoning: confirm permitted sign types, size and height limits for your property with city zoning maps or planning staff.
  2. Prepare drawings: produce scaled site plans, elevations, materials and mounting details and engineering where required.
  3. Submit application: complete the sign permit or development permit application and attach required documents and fees.
  4. Pay fees: pay the published permit fee via the city’s payment methods.
  5. Await review: the city reviews for zoning, structural and electrical compliance and may request revisions.
  6. Inspection and install: obtain any required inspections or approvals before and after installation.

Key Takeaways

  • Always verify zoning-based size and height limits before fabrication.
  • Contact planning or bylaw staff early to reduce delays and enforcement risk.
  • Fees and fines may apply; confirm current schedules with the city.

Help and Support / Resources

Categories

General Governance and Administration Public Safety Public Health and Welfare Land Use and Zoning Housing and Building Standards Transportation Environmental Protection Parks and Public Spaces Business and Consumer Protection Taxation and Finance Labor and Employment Education Civil Rights and Equity Elections and Campaign Finance Events and Special Uses Signs and Advertising Utilities and Infrastructure Technology and Data